HobbyKing
SPINNER 30DIAM / 3.17MM SHAFT
Weight:9g,
Spinner suits motors with a 3.17mm shaft. Diameter is 30mm ...5 Reviews
HobbyKing
BMS-810DMG+HS HIGH PERFORMANCE DIGITAL SERVO (METAL GEAR) 7.2KG / .19SEC / 45G
| Weight | 45g / 1.60oz |
| Dimensions | 40.5 x 20 x 37 mm / 1.60 x 0.78 x 1.52 inch |
| Torque At 4.8V | 7.2kg/cm , 104 oz/in |
| Torque At 6.0V | 8.6kg/cm , 116 oz/in |
| Speed At 4.8V | 0.19 sec / 60° at no load |
| Speed At 6.0V | 0.17 sec / 60° at no load |
5 Reviews
HobbyKing
TURNIGY PROGRAMMING CARD FOR TZ85A ESC
| Brake | off |
| Low voltage cutoff threshold | Medium (3.0V/65%) |
| Timing setup | Automatic |
| Soft Acceleration Start Up | Medium |
| Governor mode | OFF |
| Frequency | 8kHz |
| Low voltage cutoff type | Reduce power |
Programming features:, Brake setting (we recommend using brake for only folding props applications), Factory default settings:, Battery type Detect:, LiPo with Automatic Cell,
Turnigy Programming card for Tz85A ESC Battery type(LiPo or NiCd/NiMh) ...5 Reviews
HobbyKing
HEXTRONIK 24GRAM BRUSHLESS OUTRUNNER 1500KV
| No Load Current | .5A |
| Suggested Lipo | 3 cell 11.1v |
| Thrust | 400g+ |
| Suggested Prop | 8x3.8 |
Max Load: 7A,
Brushless Outrunner Motor. Kv - 1500 Load Current 9A For ...5 Reviews
HobbyKing
160W DREMEL STYLE ROTARY HAND-TOOL W/ 33PC SET 110V
| Voltage | 110V-60Hz |
| Maximum output | 160W |
| No load speed | 8,000-35,000rpm |
| Collet chuck capacity | 2.0-3.2mm dia. |
Specifications:, Plug Type:US,
An indispensable tool for any hobbiests workshop. This quality built ...5 Reviews
HobbyKing
KD REPLACEMENT SHAFT KIT 36-__L
,
Replacement shaft kit for KD Motors. Comes with; 1 x ...5 Reviews
HobbyKing
710MM MS COMPOSIT 3D NIGHT MAIN BLADES
| Length | 710mm |
| Width | 58mm |
| Grip | 12mm |
| Hole | 4mm |
5 Reviews
HobbyKing
107MM MS COMPOSIT 90 SIZE 3D NIGHT TAIL BLADE
| Length | 107mm |
| Grip | 5mm |
| Hole | 3mm |
5 Reviews
HobbyKing
HOBBYKING SS SERIES 35-40A ESC
| Weight | 27g |
| Size | 45x24x8mm |
| Cells | 2-3S (Auto Detect) |
| Max Current | 35A |
| Burst | 40A |
| Maximum Kv supported | 2000rpm/v |
| Battery setting | LiPo and NiMH |
| Brake | Enable/Disable |
BEC: 3A,
The Hobbyking SS series comes with a limited range of ...5 Reviews
HobbyKing
WOOD STICK MOUNT FOR FOAMIES (10MM)
Weight: 9g,
10mm wood stick mount for foamies and other small planes. ...5 Reviews
HobbyKing
FUTABA 6EX 2.4GHZ FAAST RADIO SYSTEM W/R617FS RECEIVER (MODE 1)
| Specifications | Transmitter; |
| Power Supply | 9.6V |
| Current Drain | 170mA |
| Size | 1.6 x 1.1 x .35" (40 x 27 x 9mm) |
| Power Requirement | 4.8 - 6V |
| Current Drain | 80mA (at no signal) |
Programming Features:, Trainer function-transmitter can be master or student, compatible with other Futaba systems, Weight: 7g, Includes:, Futaba 6EX Transmitter,
Six model memory Servo reversing End point adjustment Airplane or ...5 Reviews
HobbyKing
TURNIGY PLUSH 18AMP SPEED CONTROLLER
| Cont Current | 18A |
| Burst Current | 22A |
| BEC Mode | Linear |
| BEC | 5v / 2A |
| Lipo Cells | 2-4 |
| NiMH | 5-12 |
| Weight | 19g |
| Size | 24x45x11mm |
5 Reviews
HobbyKing
ELEVATOR SPLITTER 2-56 BALL TYPE
,
Elevator Splitter 2-56 Ball type Unique locking Ball Joints for ...5 Reviews
HobbyKing
3D SPINNER FOR DLE111 / DA100 / TMM-53 /TMM-106 / 3W 50-100 (GREEN)
| Shaft size | 10mm |
| Dimensions | 55x33mm |
| Bolt hole | 5mm |
HobbyKing
TURNIGY 1:4 SCALE BRUSHLESS GOKART ARR.
| Length | 450mm |
| Width | (F)262mm / (R)305mm |
| Height | 201mm |
| Ground Clearance | 5~12mm |
| Top Speed | 45~60km/h |
| Tyres | 56×30mm / 58×45mm |
| Pinion | 13T |
| Driving Weight | 2,100g (approx.) |
| LiPo | 2S 4000~5200mAh Hardcase Lipo (140x48x50mm max size) |
The TURNIGY 1:4 scale gokart is a real blast to drive, with it's low center of gravity and ultra sticky TruRubber* tyres which keep the kart turning sharply. A powerful full size servo is included with kart to keep the steering precise and quick, while the non differential rear tyres lay rubber on each corner!, Gear Ratio: 13:2.37, Drive/Main Ratio: 13:47, T-Tube/Main Ratio: 20:30, TruRubber: TURNIGY's very own super-soft rubber compound that sticks to road surfaces better than standard street tyres.,
The entire floor pan is made of 4mm Carbon fiber ...5 Reviews